materials For Diodelasers

materials For Diodelasers

Maybe you have it LaserGrade Diode Label seen on our website? This blue shield tells you that the material you view can be cut with a diodelaser. This way you prevent failed projects.

Diode laser machines are very popular especially among hobbyists, because they are affordable and compact. Thanks to the Diodelasers, everyone can make objects themselves and the hobby of laser cutting has become a lot more accessible. As for the Diodelaser materials So there are some limitations.

Here you will only find laser sheet materials who can safely in the diodelaser. So you don't have to worry about burned edges, bad cutting lines or even unsafe situations. 

Did you know that ... dicodelasers without a hood are actually unsafe? It is better to invest more in a diodelaser with a roof for better drainage of smoke, good cover of your machine if you do not use it and protect your eyes while cutting.

The diode laser machine materials by Lasersheets

On this page you will find alone materials that can be safe in the diode laser. Do you have an xtool, sculpfin, ortur, gweike or glowforge aura diodelaser? That is the page for you. Here you will find wood for the diodelaser, cardboard, rubber, foam and felt. All materials are provided with it LaserGrade Diode Label and therefore guaranteed safe.

Which diodelaser materials Are we selling?

• Wood For diodelaser, such as bamboo, MDF and plywood.

• Foam and rubber For the Dicodelaser, such as PE-hard foam, neoprene, CR rubber, soft foam and acoustic foam.

• Cardboard and paper For the diode laser machine, such as corrugated cardboard, felt cardboard and gasket paper.

• Other nice materials, such as double -sided adhesive foil, laser board and wool felt.

A varied offer

With this one materials So you can make many different objects. A acoustic panelFor example, parts for your model (you can make the smallest details with us laser board) or a box. Separate materials as wool felt and CR rubber Add your variation to your designs.

You can make beautiful objects with a Dicodelaser, but the choice under Dicodelaser materials Remains more limited than with CO2 lasers. Diodelasers have not been on the market for a long time, so this will undoubtedly change in the future. If you want to make something of acrylic, you need a (more expensive) CO2 laser cutter for that.

What are not a suitable diodelaser materials?

Bee Lasersheets Do you see at a glance which materials In your Xtool, Ortur, Glowforge Aura, Gweike or Sculpfun DiodeSeraser. That is possible in three ways:

• Check if the xtool materials It Lasergrade Diode label.

• All Diodelaser materials That we sell are summarized on this page.

• Choose "diodelaser" between the filters in our material range.

However, you do not always have this information anywhere else at hand. Most of the wood sheet material is simply suitable for the diodelaser, but if you look between the plastics, then it is better to pay attention.

Acrylate cannot, for example, be used in the diodelaser. This is going to smoke and melt and it produces unsafe situations. Other plastics such as polypropylene, engraving laminate, HDPE, POM, PETG, PS and a number of types of rubber are also not suitable for use in the diodelaser.

Lasersheets Has Diodelaser materials

It is not difficult for us to do the right one materials to be found for your diodelaser. In any case, you are completely in the right place here. 

Is something not clear? Do you have questions about Diodelaser materials Or about your device itself? Take contact On with us. We have the experience and a passion for laser cutting, so we are happy to help you further.