LaserGrade CO₂
This material is suitable and safe for your CO₂ laser cutter!
This means that we, Lasersheets, have extensively tested and approved this material on our own lasers.
Please note; how thick your laser can cut this material depends on your laser power. More power is needed for thicker sheets!
LaserGrade Diode
This material is suitable for your diode laser!
Not all materials can be laser cut with a diode laser, but this one can. We have extensively tested this material on our own diode lasers and approved it.
Please note; how thick your laser can cut this material depends on your laser power. Thicker sheets requires more power!
Bundle 6 mm Black MDF, 10 sheets at 39 x 30 cm
- Sku:
✔️ Platen hebben 0 tot 10mm overmaat
✔️ Gegarandeerd goed te laseren
✔️ Binnen 3 werkdagen geleverd
✔️ Verzendkosten vanaf €4,50
✔️ Gratis verzending vanaf €100
Verzending
Binnen drie werkdagen heb jij je pakket in huis.
Vervoerder
Pakketten worden geleverd door PostNL. Pallets worden onder andere geleverd door DHL.
Verzendkosten
Vanaf €9,50 op basis van gewicht. De verzendkosten worden berekend tijdens checkout.
Retouren
Retouren kan binnen 30 dagen, Je krijgt je geld terug binnen 14 dagen. Regel het makkelijk zelf via de site, verzendkosten voor een retour zijn voor eigen rekening.
Bundle 6 mm Black MDF, 10 sheets at 39 x 30 cm
Beschrijving
Do you want to get started with black MDF? Then take advantage of this bundle.
Note: the color of this sheets varies by batch between dark gray and black. There can also be small brown fibers in the wood.
The sheets are sawn at approx. 39 x 30 cm. The saw margin is with this sheets +/- 1 cm so the sheets differ slightly from each other.
Black MDF is a through and through colored variant of MDF, Medium Dense Fiberboard. This sheets are 6 mm thick. Compared to normal (brown) MDF, this species is slightly stronger, has a slightly higher density (heavier) and can stand a little better against moisture.
For example, use it for laser cutting logos, artworks, lettering, housings, boxes, molds and much more.
Black MDF is easy to laser cutting, although you will have to laser a little slower than with normal MDF. The edges can release light after cutting; You can remove this with a damp cloth. Of course you can also saw and mill it.
The stock of this product is limited, gone = gone!
GEEN VERRASSINGEN
Met een gerust hart lasermateriaal kopen
GEEN VERRASSINGEN
Met een gerust hart lasermateriaal kopen
LaserGrade
Materialen uitgekozen voor lasersnijden
3 werkdagen levertijd
Binnen drie werkdagen geleverd
Staffelkorting op plaatmaterialen
Oplopende kortingen bij hogere aantallen